INDUSTRIAL UNIVERSITY OF HO CHI MINH CITY
OFFICE OF TESTING AND QUALITY ASSURANCE
IUH Advances Wastewater Treatment Technologies Through Applied Research and Environmental Engineering Education
15/10/2025

Industrial University of Ho Chi Minh City (IUH) promotes sustainable wastewater management through applied scientific research, environmental engineering education and the development of pollution control technologies. These activities reflect the University’s commitment to integrating environmental protection into research and teaching while contributing to Sustainable Development Goal 6 – Clean Water and Sanitation.

In its 2025 sustainability development orientation, IUH identified wastewater treatment and recycling technologies as priority areas for research and technological development. The University emphasises practical solutions for industrial and domestic wastewater treatment, supporting the protection of water resources and sustainable environmental management.

Activity 1: Developing a Fenton-Based Process for Printing Ink Wastewater Treatment

IUH researchers developed and evaluated a wastewater treatment process using Fenton’s Advanced Oxidation Process (AOP) to remove pollutants from printing ink wastewater generated at the University’s printing workshop.

The research, conducted by Vu Dinh Khang and Bui Thi Ngoc Phuong and published in the Journal of Science and Technology – IUH, examined operating parameters affecting treatment efficiency, including reaction pH, chemical dosage and reaction time.

Based on the experimental results, the researchers developed a treatment model with a designed capacity of 10 litres per hour, applying the Fenton oxidation process to printing ink wastewater.

Under the optimised experimental conditions, the study reported:

  • 97.2% colour removal efficiency.
  • 95.8% chemical oxygen demand (COD) removal efficiency.
  • An optimal reaction pH of 3.
  • An optimal reaction time of 2.5 hours.

The treatment model provides an applied technological approach to removing persistent organic pollutants and colour compounds from printing wastewater. These research results contribute to the development of wastewater treatment methods relevant to university workshops and industrial facilities.

Activity 2: Integrating Wastewater Treatment Engineering into Environmental Education

IUH incorporates wastewater treatment technologies into its Environmental Engineering Technology education through specialised courses addressing wastewater treatment processes and pollution control.

The Wastewater Treatment Engineering course introduces students to the principles and applications of wastewater treatment, including physical, chemical and biological treatment methods, treatment system design and environmental assessment.

Through the course, students develop knowledge of wastewater characteristics, treatment technologies and technical approaches to reducing pollutant discharge.

This educational approach connects environmental engineering knowledge with practical applications, helping learners develop professional competencies relevant to water resource protection, industrial wastewater management and sustainable environmental technologies.

Activity 3: Strengthening Wastewater Treatment Research and Technology Development

In 2025, IUH continued to identify wastewater treatment as an important area of its institutional sustainability research orientation.

The University’s SDG 6 sustainability framework prioritised research into sustainable wastewater treatment technologies, including advanced filtration, biological treatment processes and resource-efficient wastewater recycling solutions.

These research directions support the development of practical environmental technologies suitable for industrial and urban contexts in Vietnam.

By connecting scientific research, engineering education and technology development, IUH contributes knowledge and technical expertise relevant to wastewater pollution control and sustainable water resource management.

Results and Impact

IUH’s wastewater treatment research and educational activities contribute to the development of practical environmental technologies and professional expertise.

The Fenton-based printing ink wastewater treatment research demonstrated 97.2% colour removal and 95.8% COD removal under optimised experimental conditions, providing quantitative results for evaluating treatment performance and developing wastewater treatment models.

Through specialised environmental engineering education, IUH supports learners in developing the knowledge and technical skills required to understand wastewater treatment processes, assess pollution control technologies and apply sustainable environmental engineering approaches.

Together, these activities reinforce IUH’s research and educational contribution to wastewater treatment, environmental pollution prevention and sustainable water management, supporting SDG 6, particularly Target 6.3 on improving water quality and wastewater treatment.

Sources & References

  1. Vu Dinh Khang and Bui Thi Ngoc Phuong – Printing Ink Wastewater Treatment from Printing Plant of Industrial University of Ho Chi Minh City by Fenton’s Advanced Oxidation Process, Apply for 10L/H Capacity Model. Journal of Science and Technology – IUH, Vol. 36, No. 06 (2018):
    https://jst.iuh.edu.vn/index.php/jst-iuh/article/view/846
  2. IUH – Environmental Engineering Technology Programme:
    https://tuyensinh.iuh.edu.vn/huongnghiep/fXemChiTiet?sttPar=11

IUH phát triển công nghệ xử lý nước thải thông qua nghiên cứu ứng dụng và đào tạo kỹ thuật môi trường

Trường Đại học Công nghiệp Thành phố Hồ Chí Minh (IUH) thúc đẩy quản lý nước thải bền vững thông qua hoạt động nghiên cứu khoa học ứng dụng, đào tạo kỹ thuật môi trường và phát triển các công nghệ kiểm soát ô nhiễm. Những hoạt động này thể hiện định hướng của Nhà trường trong việc gắn kết bảo vệ môi trường với nghiên cứu và giảng dạy, góp phần thực hiện Mục tiêu Phát triển bền vững số 6 – Nước sạch và vệ sinh.

Trong định hướng phát triển bền vững năm 2025, IUH xác định công nghệ xử lý và tái chế nước thải là một trong những lĩnh vực ưu tiên nghiên cứu, phát triển công nghệ. Nhà trường chú trọng các giải pháp xử lý nước thải công nghiệp và sinh hoạt có tính ứng dụng, góp phần bảo vệ tài nguyên nước và quản lý môi trường bền vững.

Hoạt động 1: Nghiên cứu phát triển quy trình xử lý nước thải mực in bằng công nghệ Fenton

Các nhà nghiên cứu IUH đã phát triển và đánh giá quy trình xử lý nước thải bằng phương pháp oxy hóa bậc cao Fenton (Advanced Oxidation Process – AOP) nhằm loại bỏ các chất ô nhiễm trong nước thải mực in phát sinh tại xưởng in của Nhà trường.

Công trình do Vũ Đình Khang và Bùi Thị Ngọc Phương thực hiện, công bố trên Tạp chí Khoa học và Công nghệ – IUH, nghiên cứu các thông số vận hành ảnh hưởng đến hiệu quả xử lý, bao gồm pH phản ứng, liều lượng hóa chất và thời gian phản ứng.

Dựa trên kết quả thực nghiệm, nhóm nghiên cứu xây dựng mô hình xử lý nước thải mực in bằng công nghệ Fenton với công suất thiết kế 10 lít/giờ.

Trong điều kiện thí nghiệm tối ưu, nghiên cứu ghi nhận:

  • Hiệu suất xử lý độ màu đạt 97,2%.
  • Hiệu suất xử lý COD đạt 95,8%.
  • pH phản ứng tối ưu là 3.
  • Thời gian phản ứng tối ưu là 2,5 giờ.

Mô hình cung cấp giải pháp công nghệ ứng dụng nhằm loại bỏ các hợp chất hữu cơ khó phân hủy và chất tạo màu trong nước thải ngành in. Kết quả nghiên cứu đóng góp vào phát triển phương pháp xử lý nước thải phù hợp với các xưởng thực hành và cơ sở sản xuất công nghiệp.

Hoạt động 2: Tích hợp kiến thức xử lý nước thải vào chương trình đào tạo kỹ thuật môi trường

IUH tích hợp kiến thức công nghệ xử lý nước thải vào chương trình đào tạo ngành Công nghệ Kỹ thuật Môi trường thông qua các học phần chuyên môn về xử lý nước thải và kiểm soát ô nhiễm.

Học phần Kỹ thuật xử lý nước thải trang bị cho sinh viên kiến thức về nguyên lý và ứng dụng các phương pháp xử lý nước thải, bao gồm xử lý cơ học, hóa học, sinh học, thiết kế hệ thống xử lý và đánh giá môi trường.

Thông qua học phần, sinh viên phát triển hiểu biết về đặc tính nước thải, công nghệ xử lý và các giải pháp kỹ thuật nhằm giảm thiểu chất ô nhiễm trong dòng thải.

Cách tiếp cận này kết nối kiến thức kỹ thuật môi trường với các ứng dụng thực tiễn, giúp người học phát triển năng lực chuyên môn phục vụ bảo vệ tài nguyên nước, quản lý nước thải công nghiệp và phát triển công nghệ môi trường bền vững.

Hoạt động 3: Tăng cường định hướng nghiên cứu và phát triển công nghệ xử lý nước thải

Trong năm 2025, IUH tiếp tục xác định xử lý nước thải là lĩnh vực quan trọng trong định hướng nghiên cứu phục vụ phát triển bền vững của Nhà trường.

Khung định hướng thực hiện SDG 6 của IUH ưu tiên nghiên cứu các công nghệ xử lý nước thải bền vững, bao gồm công nghệ lọc tiên tiến, các quá trình xử lý sinh học và giải pháp tái chế nước thải theo hướng sử dụng tài nguyên hiệu quả.

Những định hướng này thúc đẩy phát triển các công nghệ môi trường có tính ứng dụng, phù hợp với điều kiện công nghiệp và đô thị tại Việt Nam.

Thông qua kết nối nghiên cứu khoa học, đào tạo kỹ thuật và phát triển công nghệ, IUH đóng góp tri thức và năng lực chuyên môn phục vụ kiểm soát ô nhiễm nước thải và quản lý tài nguyên nước bền vững.

Kết quả và Tác động

Các hoạt động nghiên cứu và đào tạo của IUH đóng góp vào phát triển công nghệ môi trường ứng dụng và nguồn nhân lực chuyên môn về xử lý nước thải.

Nghiên cứu xử lý nước thải mực in bằng phương pháp Fenton đạt hiệu suất xử lý độ màu 97,2% và COD 95,8% trong điều kiện thực nghiệm tối ưu, cung cấp kết quả định lượng phục vụ đánh giá hiệu quả công nghệ và phát triển mô hình xử lý nước thải.

Thông qua đào tạo chuyên ngành, IUH giúp người học phát triển kiến thức và kỹ năng kỹ thuật để tìm hiểu quy trình xử lý nước thải, đánh giá công nghệ kiểm soát ô nhiễm và vận dụng các giải pháp kỹ thuật môi trường bền vững.

Những hoạt động này góp phần tăng cường đóng góp của IUH trong lĩnh vực nghiên cứu, đào tạo công nghệ xử lý nước thải, phòng ngừa ô nhiễm và quản lý tài nguyên nước bền vững, hướng đến thực hiện SDG 6, đặc biệt là Mục tiêu 6.3 về cải thiện chất lượng nước và xử lý nước thải.

Nguồn minh chứng

  1. Vũ Đình Khang và Bùi Thị Ngọc Phương – Xử lý nước thải mực in từ xưởng in Trường Đại học Công nghiệp Thành phố Hồ Chí Minh bằng phương pháp oxy hóa bậc cao Fenton, ứng dụng mô hình xử lý 10 lít/giờ. Tạp chí Khoa học và Công nghệ – IUH, số 36A (2018):
    https://jst.iuh.edu.vn/index.php/jst-iuh/article/view/846
  2. IUH – Chương trình đào tạo ngành Công nghệ Kỹ thuật Môi trường:
    https://tuyensinh.iuh.edu.vn/huongnghiep/fXemChiTiet?sttPar=11
Cooperate