INDUSTRIAL UNIVERSITY OF HO CHI MINH CITY
OFFICE OF TESTING AND QUALITY ASSURANCE
IUH Strengthens Hazardous Waste Management through Laboratory Procedures, Periodic Collection and Professional Waste Treatment
31/07/2026

Hazardous waste generated from laboratory teaching, scientific research and experimental activities requires systematic management to prevent risks to human health and the environment. Chemical residues, contaminated materials and potentially hazardous biological waste may affect soil, water resources and natural ecosystems if they are improperly handled, stored or disposed of.

Industrial University of Ho Chi Minh City (IUH) addresses these risks through laboratory waste management procedures, administrative arrangements for periodic hazardous waste collection and a framework agreement with an external waste treatment service provider.

The University’s supporting documentation identifies three complementary components: identification and segregation of hazardous waste at source, collection requests approved through institutional management procedures, and contractual arrangements for waste transportation and treatment.

These measures contribute to Sustainable Development Goal 15 (SDG 15) – Life on Land by supporting pollution prevention and responsible waste management. They also have complementary relevance to SDG 12 – Responsible Consumption and Production and SDG 6 – Clean Water and Sanitation.

Activity 1: Identifying, Classifying and Safely Storing Hazardous Waste Generated by University Laboratories

The effective management of hazardous waste begins at the point where it is generated. Proper identification, classification and storage are necessary to prevent accidental exposure, inappropriate mixing of chemical substances and uncontrolled release into the environment.

According to IUH’s supporting documentation, laboratories associated with the Faculty of Chemical Engineering, the Institute for Environmental Science, Engineering and Management (IESEM) and other relevant units use waste management procedures and laboratory safety rules.

These arrangements address hazardous materials generated during practical teaching and research activities, including used organic solvents, acids, alkalis, heavy-metal-containing substances and chemically contaminated materials.

The supporting dossier identifies five hazardous waste codes: 020106, 020202, 020302, 170803 and 191001.

Chemical waste is described as being collected separately, identified according to relevant waste categories and stored in sealed containers with appropriate labelling.

Materials such as contaminated cleaning cloths and chemical packaging are collected separately in designated PP or PE bags, according to the procedures described in the dossier.

For biological materials requiring decontamination, the documentation refers to the use of autoclave sterilization before subsequent waste handling.

The procedures also address responses to accidental spills. In such situations, hazardous materials and waste generated during the response are collected and handled through appropriate designated waste containers.

These practices are intended to reduce the likelihood of uncontrolled releases and protect students, lecturers, researchers, laboratory technicians and other personnel who may come into contact with hazardous materials.

Waste separation at source also helps institutional units organize temporary storage and prepare materials for collection by a specialized service provider.

For laboratory users, clear identification and handling requirements support safer working practices and environmental responsibility.

For University management, standardized waste classification and labelling can provide a basis for maintaining waste inventories, reviewing storage conditions and monitoring compliance.

The approach illustrates the importance of incorporating hazardous waste management into routine educational and research operations rather than relying only on treatment after waste has accumulated.

However, the current dossier does not include the complete approved procedures, their original issue dates or all laboratory inspection and waste inventory records for 2025.

The applicability of each hazardous waste code to a particular waste stream also requires verification against the relevant waste classification requirements.

Therefore, the supporting material describes a systematic approach to hazardous waste segregation and storage, while comprehensive implementation evidence remains to be confirmed.

Through laboratory waste management procedures, IUH supports pollution prevention and helps reduce potential environmental risks associated with hazardous materials.

Evidence source:

Waste Management Procedure and Laboratory Rules – Faculty of Chemical Engineering and Institute for Environmental Science, Engineering and Management, referenced in the University’s supporting dossier.

A direct public evidence URL has not yet been provided.

Activity 2: Organizing Periodic Hazardous Waste Collection through University-Approved Administrative Procedures

Hazardous waste management requires not only appropriate storage but also an organized process for arranging collection and treatment before excessive quantities accumulate.

According to IUH’s supporting documentation, laboratory units submit requests for hazardous waste collection at the end of academic semesters.

These requests are reviewed through the University’s administrative management process, enabling the relevant facilities management unit to coordinate with an external environmental service provider.

On 30 October 2025, the Faculty of Chemical Engineering submitted a request for the collection and treatment of hazardous waste generated during the first semester of the 2025–2026 academic year.

The request identified categories including organic solvents, solid chemical waste, chemical containers and waste associated with pharmaceutical practical teaching.

The supporting dossier includes an image of the request document and describes its approval by University leadership.

A second request, dated 5 May 2026, was submitted by the Institute of Biotechnology and Food Technology for waste generated during the second semester.

According to the dossier, this request included comparable waste categories and expired chemical containers.

The two administrative records demonstrate that hazardous waste collection requests were prepared in different academic semesters and submitted through a formal approval process.

This approach supports coordination among teaching laboratories, institutional management units and specialized waste treatment providers.

For laboratory units, periodic collection requests create opportunities to review accumulated waste and organize appropriate removal from temporary storage areas.

For facilities management, the approval process provides a basis for planning waste collection and maintaining administrative records.

For institutional leadership, documented requests support oversight of hazardous waste management activities across different academic units.

These procedures may help prevent the prolonged accumulation of hazardous waste and clarify responsibilities for arranging external collection.

However, a signed or approved request is not equivalent to evidence that the waste was actually collected and treated.

The collection date, waste quantities, receiving contractor and subsequent treatment confirmation must be established through transfer records and other relevant documents.

The request dated 30 October 2025 is directly relevant to the target reporting year. The request dated 5 May 2026 demonstrates a subsequent administrative activity and should not be counted as a 2025 result.

Through periodic collection arrangements and documented approval procedures, IUH supports a more organized and accountable approach to hazardous waste management.

Evidence:

Hazardous waste collection request of the Faculty of Chemical Engineering dated 30/10/2025.

Hazardous waste collection request of the Institute of Biotechnology and Food Technology dated 05/05/2026.

Both documents are reproduced in the supporting dossier. No direct public evidence URL was provided.

Activity 3: Establishing a Hazardous Waste Collection and Treatment Arrangement with Viet Uc Environment Joint Stock Company

The appropriate transfer of hazardous waste to an authorized service provider is an important component of institutional environmental management.

IUH’s supporting documentation includes a framework agreement between the Institute for Environmental Science, Engineering and Management and Viet Uc Environment Joint Stock Company.

The agreement is identified by contract number HĐ.TPHCM/VAE and concerns the collection, transportation and treatment of hazardous waste.

According to the supporting narrative, the contractor operates a waste treatment facility in Le Minh Xuan Industrial Park, Binh Chanh, Ho Chi Minh City.

The dossier describes a five-year contractual arrangement beginning in January 2022 and extending into 2027.

However, the photograph of the contract’s first page shows the date 4 January 2022, while the accompanying text cites 1 January 2022. The precise signing date, effective period and expiry date must therefore be confirmed from the complete signed agreement.

The arrangement provides a contractual basis for transferring hazardous waste from the University’s relevant facilities to a specialized external service provider.

Under the mechanism described in the dossier, the contractor periodically collects, transports and treats waste and provides hazardous waste tracking documentation to the University.

The supporting narrative refers to the return of documentation within 15 days, subject to verification against the original contractual terms and applicable requirements.

Such documentation is important because waste management responsibilities extend beyond the point at which hazardous materials leave the University campus.

Transfer and treatment records can help establish traceability, identify the receiving organization and document the subsequent handling of waste.

The contractual arrangement also supports the institutional allocation of responsibilities among laboratory units, facilities management personnel and the external service provider.

For IUH, access to appropriate waste collection and treatment services can contribute to the management of hazards associated with teaching and research.

For surrounding communities and ecosystems, proper hazardous waste treatment is relevant to reducing potential exposure to harmful materials.

However, the first page of the contract alone does not confirm that all waste generated in 2025 was transferred and treated, or that the contractor held all relevant authorizations throughout the reporting period.

The current dossier does not include a complete set of hazardous waste transfer manifests, recorded quantities or final treatment confirmations for 2025.

The regulatory references in the original agreement should also be reviewed against the legal framework applicable during the 2025 reporting year.

Therefore, the agreement provides evidence of an established waste treatment arrangement, while its actual operation in 2025 requires supporting transaction and compliance records.

Through its external hazardous waste management arrangement, IUH supports the development of a traceable process for responsible waste handling and environmental protection.

Evidence source:

Framework Contract No. HĐ.TPHCM/VAE between IESEM–IUH and Viet Uc Environment Joint Stock Company, reproduced in the supporting dossier.

The complete contract, signing date, validity period, contractor authorization and waste transfer records require verification.

No direct public evidence URL was provided.

Results and Impact

IUH’s supporting documentation identifies three interconnected components of hazardous waste management: segregation and safe storage at source, periodic administrative collection requests and a framework agreement for external waste collection and treatment.

Laboratory procedures describe the classification of chemical and other hazardous waste, the use of sealed and labelled containers, and the handling of contaminated materials and accidental spills.

The administrative records include a hazardous waste treatment request dated 30 October 2025 from the Faculty of Chemical Engineering and a subsequent request dated 5 May 2026 from the Institute of Biotechnology and Food Technology.

A framework agreement with Viet Uc Environment Joint Stock Company provides a documented contractual basis for arranging hazardous waste collection, transportation and treatment.

Together, these measures indicate an institutional approach that addresses different stages of hazardous waste management, from initial generation through to external treatment arrangements.

The practices are relevant to protecting laboratory users, reducing risks of environmental contamination and promoting accountability in waste handling.

They support SDG 15 through pollution prevention, with complementary contributions to responsible resource management and the protection of water quality.

However, the available documentation does not establish the total amount of hazardous waste collected and treated in 2025, the complete operation of the waste tracking system or independently verified environmental outcomes.

The most direct evidence for the 2025 reporting year is the October 2025 collection request, together with any approved procedures and valid contractual documents covering that period. Additional transfer and treatment records are required to demonstrate completed hazardous waste management activities.

IUH tăng cường quản lý chất thải nguy hại từ phòng thí nghiệm đến thu gom, vận chuyển và xử lý nhằm bảo vệ hệ sinh thái

Quản lý chất thải nguy hại là một nội dung quan trọng trong công tác bảo vệ môi trường tại các cơ sở giáo dục đại học, đặc biệt đối với những đơn vị có hoạt động đào tạo thực hành, thí nghiệm và nghiên cứu khoa học. Các loại dung môi, hóa chất thải, vật liệu nhiễm hóa chất và chất thải sinh học có thể gây ảnh hưởng đến sức khỏe con người, môi trường đất, nước và hệ sinh thái nếu không được thu gom, lưu chứa, xử lý phù hợp.

Trường Đại học Công nghiệp Thành phố Hồ Chí Minh (IUH) chú trọng quản lý chất thải nguy hại thông qua quy trình phân loại tại nguồn, yêu cầu lưu chứa an toàn, tổ chức thu gom theo học kỳ và cơ chế chuyển giao cho đơn vị xử lý chuyên môn.

Hồ sơ của Nhà trường ghi nhận ba nội dung chính gồm thực hiện quy trình quản lý chất thải tại phòng thí nghiệm, lập phiếu đề nghị thu gom có phê duyệt và duy trì hợp đồng nguyên tắc với đơn vị thu gom, vận chuyển, xử lý chất thải nguy hại.

Những hoạt động này góp phần thực hiện Mục tiêu phát triển bền vững số 15 (SDG 15) – Hệ sinh thái trên cạn thông qua phòng ngừa ô nhiễm đất và môi trường tự nhiên, đồng thời hỗ trợ SDG 12 – Tiêu dùng và sản xuất có trách nhiệm và SDG 6 – Nước sạch và vệ sinh.

Hoạt động 1: Thực hiện quy trình nhận diện, phân loại và lưu chứa chất thải nguy hại tại các phòng thí nghiệm

Quản lý chất thải nguy hại hiệu quả cần được thực hiện ngay tại nơi phát sinh thông qua nhận diện tính chất chất thải, phân loại phù hợp và lưu chứa an toàn trước khi chuyển giao xử lý.

Theo hồ sơ tổng hợp, các phòng thí nghiệm thuộc Khoa Công nghệ Hóa học, Viện Khoa học Công nghệ và Quản lý Môi trường (IESEM) cùng những đơn vị liên quan của IUH thực hiện Quy trình quản lý chất thải và Nội quy phòng thực hành.

Các loại chất thải được đề cập gồm dung môi hữu cơ đã qua sử dụng, axit, kiềm, muối kim loại nặng và những vật liệu có thành phần hóa chất nguy hại phát sinh từ hoạt động giảng dạy, thực hành và nghiên cứu.

Hồ sơ ghi nhận năm mã chất thải nguy hại là 020106, 020202, 020302, 170803 và 191001.

Theo phương án được mô tả, chất thải hóa học được phân loại, thu gom riêng và lưu chứa trong những thùng chuyên dụng có nắp kín, nhãn nhận diện phù hợp.

Đối với giẻ lau, bao bì và vật liệu bị nhiễm hóa chất, quy trình đề cập đến việc đóng bao PP hoặc PE riêng để hạn chế nguy cơ phát tán trong quá trình lưu giữ.

Đối với vật liệu sinh học cần khử nhiễm, hồ sơ nêu yêu cầu sử dụng thiết bị hấp tiệt trùng trước khi thực hiện các bước xử lý tiếp theo.

Trong trường hợp xảy ra sự cố tràn đổ, các biện pháp ứng phó được áp dụng nhằm hạn chế sự lan truyền của chất nguy hại, đồng thời thu gom chất thải phát sinh từ quá trình xử lý vào dụng cụ chứa thích hợp.

Việc thực hiện những yêu cầu này có ý nghĩa trong giảm nguy cơ tiếp xúc với chất nguy hại đối với sinh viên, giảng viên, kỹ thuật viên và người lao động.

Đối với đơn vị quản lý phòng thí nghiệm, phân loại và lưu chứa riêng từng nhóm chất thải góp phần hỗ trợ công tác kiểm kê, quản lý kho lưu chứa và chuẩn bị bàn giao cho đơn vị xử lý.

Đối với môi trường, kiểm soát tại nguồn là một biện pháp phòng ngừa nguy cơ chất thải hóa học bị thải bỏ không đúng quy định hoặc đi vào hệ thống thoát nước thông thường.

Tuy nhiên, hồ sơ hiện chưa cung cấp bản quy trình đầy đủ có ngày ban hành, hồ sơ kiểm kê khối lượng chất thải theo từng mã hoặc kết quả kiểm tra việc tuân thủ tại các phòng thí nghiệm trong năm 2025.

Ngoài ra, các mã chất thải cần được đối chiếu với danh mục và cách phân loại phù hợp với từng loại chất thải thực tế.

Vì vậy, kết quả được chứng minh ở mức hồ sơ mô tả hệ thống quản lý chất thải tại nguồn; cần tiếp tục bổ sung tài liệu vận hành để xác nhận phạm vi thực hiện và hiệu quả kiểm soát.

Thông qua các biện pháp nhận diện, phân loại, lưu chứa và ứng phó sự cố, IUH hướng đến duy trì môi trường thí nghiệm an toàn, hạn chế rủi ro ô nhiễm và bảo vệ hệ sinh thái theo định hướng SDG 15.

Nguồn minh chứng:

Quy trình quản lý chất thải và Nội quy phòng thực hành của Khoa Công nghệ Hóa học và Viện Khoa học Công nghệ và Quản lý Môi trường.

Chưa có URL công khai trực tiếp cho hoạt động này.

Hoạt động 2: Tổ chức thu gom chất thải nguy hại theo học kỳ thông qua phiếu đề nghị được lãnh đạo Nhà trường phê duyệt

Bên cạnh phân loại và lưu chứa tại nguồn, việc tổ chức thu gom định kỳ là một thành phần quan trọng nhằm quản lý lượng chất thải nguy hại phát sinh trong hoạt động đào tạo và nghiên cứu.

Theo hồ sơ IUH, vào cuối mỗi học kỳ, các đơn vị có phòng thực hành, thí nghiệm lập phiếu đề nghị thu gom, xử lý chất thải nguy hại trình lãnh đạo Nhà trường xem xét.

Trên cơ sở đề nghị được phê duyệt, Phòng Quản trị phối hợp tổ chức việc thu gom thông qua đơn vị cung cấp dịch vụ môi trường phù hợp.

Ngày 30/10/2025, Khoa Công nghệ Hóa học lập phiếu đề nghị xử lý chất thải phát sinh trong học kỳ I, năm học 2025–2026.

Các nhóm chất thải được nêu trong hồ sơ gồm dung môi hữu cơ, chất thải rắn, chai lọ chứa hóa chất và chất thải liên quan đến các học phần thực hành Dược học.

Tài liệu có hình ảnh phiếu đề nghị của đơn vị với nội dung trình lãnh đạo xem xét, phê duyệt công tác thu gom, xử lý.

Đến ngày 05/05/2026, Viện Công nghệ Sinh học và Thực phẩm tiếp tục có phiếu đề nghị thu gom các nhóm chất thải phát sinh trong hoạt động thực hành, trong đó có chai lọ và hóa chất hết hạn sử dụng.

Theo bản dự thảo, hai phiếu được lãnh đạo Nhà trường phê duyệt, thể hiện cơ chế xử lý đề nghị thu gom thông qua hệ thống quản lý hành chính.

Việc lập và phê duyệt phiếu theo học kỳ góp phần xác định nhu cầu xử lý chất thải của từng đơn vị và tạo cơ sở để phối hợp với bộ phận quản lý cơ sở vật chất.

Đối với các đơn vị đào tạo, quy trình này hỗ trợ việc chủ động thống kê, báo cáo và đề nghị xử lý lượng chất thải nguy hại đã phát sinh.

Đối với Phòng Quản trị, những phiếu đề nghị là nguồn thông tin phục vụ lập kế hoạch thu gom, bố trí đầu mối phối hợp và theo dõi hồ sơ thực hiện.

Đối với lãnh đạo Nhà trường, cơ chế phê duyệt tạo cơ sở giám sát hoạt động xử lý chất thải nguy hại tại những đơn vị có thực hành, thí nghiệm.

Tuy nhiên, cần phân biệt phiếu đề nghị được phê duyệt với kết quả đã thực hiện thu gom và xử lý.

Để xác định lượng chất thải đã được chuyển giao, cần có biên bản bàn giao, chứng từ chất thải nguy hại và thông tin xác nhận từ đơn vị tiếp nhận xử lý.

Ngoài ra, phiếu ngày 30/10/2025 thuộc năm dữ liệu mục tiêu, trong khi phiếu ngày 05/05/2026 thể hiện hoạt động tiếp nối ở năm sau và không được tính là kết quả đã thực hiện trong năm 2025.

Hồ sơ cũng chưa đủ cơ sở để xác định chính xác số đợt thu gom thực tế trong năm 2025 hoặc toàn bộ lượng chất thải đã được xử lý.

Thông qua hệ thống phiếu đề nghị và quy trình phê duyệt, IUH tạo cơ sở tổ chức quản lý chất thải nguy hại theo học kỳ, tăng cường trách nhiệm của các đơn vị phát sinh và bộ phận điều phối xử lý.

Nguồn minh chứng:

Phiếu đề nghị thu gom, xử lý chất thải nguy hại của Khoa Công nghệ Hóa học ngày 30/10/2025.

Phiếu đề nghị của Viện Công nghệ Sinh học và Thực phẩm ngày 05/05/2026.

Hình ảnh hai phiếu được đính kèm trong hồ sơ. Chưa có URL công khai trực tiếp.

Hoạt động 3: Duy trì cơ chế thu gom, vận chuyển và xử lý chất thải nguy hại thông qua hợp đồng với Công ty Cổ phần Môi trường Việt Úc

Hoạt động quản lý chất thải nguy hại không kết thúc khi chất thải được đưa ra khỏi khu vực phát sinh mà còn bao gồm việc tổ chức vận chuyển, tiếp nhận và xử lý theo yêu cầu quản lý môi trường.

Hồ sơ của IUH ghi nhận Hợp đồng nguyên tắc số HĐ.TPHCM/VAE giữa Viện Khoa học Công nghệ và Quản lý Môi trường với Công ty Cổ phần Môi trường Việt Úc về hoạt động thu gom, vận chuyển và xử lý chất thải nguy hại.

Theo tài liệu, đơn vị cung cấp dịch vụ có cơ sở xử lý tại Khu công nghiệp Lê Minh Xuân, Bình Chánh, Thành phố Hồ Chí Minh.

Hồ sơ mô tả hợp đồng được ký trong tháng 01/2022, với thời hạn năm năm. Tuy nhiên, phần thuyết minh ghi ngày 01/01/2022, còn hình ảnh trang đầu hợp đồng thể hiện ngày 04/01/2022.

Vì vậy, cần đối chiếu hợp đồng ký gốc để xác nhận ngày ký, thời điểm bắt đầu hiệu lực và ngày kết thúc hợp đồng.

Hợp đồng tạo cơ sở phân định trách nhiệm giữa đơn vị phát sinh chất thải và đơn vị cung cấp dịch vụ trong hoạt động thu gom, vận chuyển và xử lý.

Theo cơ chế được mô tả, chất thải nguy hại được thu gom định kỳ và có chứng từ quản lý để phục vụ theo dõi việc chuyển giao.

Hồ sơ cũng đề cập thời hạn chuyển trả chứng từ trong vòng 15 ngày. Thông tin này cần được xác minh qua toàn văn điều khoản hợp đồng và hồ sơ thực hiện.

Việc tổ chức xử lý thông qua đơn vị chuyên môn có ý nghĩa đối với quản lý an toàn chất thải nguy hại phát sinh từ phòng thí nghiệm.

Đối với Nhà trường, hợp đồng là căn cứ để phối hợp dịch vụ, theo dõi trách nhiệm các bên và xây dựng hồ sơ quản lý chất thải.

Đối với đơn vị phát sinh, hoạt động chuyển giao tạo điều kiện giải phóng khu vực lưu chứa sau khi chất thải được tiếp nhận đúng quy trình.

Đối với công tác kiểm tra, chứng từ và biên bản bàn giao là những tài liệu cần thiết nhằm xác định loại chất thải, khối lượng, thời gian chuyển giao và đơn vị tiếp nhận.

Việc quản lý từ khâu phát sinh đến chuyển giao xử lý góp phần hạn chế nguy cơ chất thải nguy hại bị thải bỏ không đúng cách, từ đó hỗ trợ bảo vệ môi trường đất, nước và hệ sinh thái.

Tuy nhiên, hình ảnh trang đầu hợp đồng chưa đủ để xác nhận giấy phép xử lý của đối tác còn phù hợp trong toàn bộ năm 2025.

Hồ sơ hiện cũng chưa cung cấp bộ chứng từ chuyển giao, khối lượng tiếp nhận và xác nhận xử lý cụ thể cho kỳ dữ liệu 2025.

Do đó, kết quả có thể xác định là sự tồn tại của một cơ chế hợp đồng xử lý chất thải nguy hại; việc thực hiện đầy đủ trong năm 2025 cần được chứng minh bằng hồ sơ giao dịch và chứng từ.

Thông qua hợp đồng dịch vụ môi trường, IUH góp phần xây dựng hệ thống quản lý chất thải nguy hại có trách nhiệm và tăng cường khả năng theo dõi từ nơi phát sinh đến đơn vị xử lý.

Nguồn minh chứng:

Hợp đồng nguyên tắc số HĐ.TPHCM/VAE giữa IESEM – IUH và Công ty Cổ phần Môi trường Việt Úc.

Hình ảnh trang đầu hợp đồng được đính kèm trong tài liệu. Chưa có URL công khai trực tiếp.

Kết quả và tác động

Hồ sơ của Trường Đại học Công nghiệp Thành phố Hồ Chí Minh ghi nhận ba nhóm biện pháp quản lý chất thải nguy hại có mối liên hệ với nhau.

Thứ nhất, quy trình quản lý chất thải và nội quy phòng thí nghiệm mô tả việc nhận diện, phân loại chất thải hóa học theo năm mã quản lý, lưu chứa trong dụng cụ phù hợp và tổ chức ứng phó khi phát sinh sự cố.

Thứ hai, Nhà trường thực hiện cơ chế tiếp nhận, phê duyệt đề nghị thu gom, xử lý chất thải nguy hại từ các đơn vị đào tạo. Trong đó, phiếu đề nghị của Khoa Công nghệ Hóa học ngày 30/10/2025 là minh chứng hành chính thuộc năm dữ liệu mục tiêu; phiếu đề nghị ngày 05/05/2026 thuộc giai đoạn tiếp theo.

Thứ ba, Hợp đồng nguyên tắc số HĐ.TPHCM/VAE với Công ty Cổ phần Môi trường Việt Úc cung cấp cơ sở tổ chức hoạt động thu gom, vận chuyển và xử lý chất thải nguy hại bên ngoài Nhà trường.

Các nội dung này thể hiện cách tiếp cận quản lý theo các công đoạn liên tiếp, từ kiểm soát chất thải tại nguồn đến tổ chức xử lý thông qua đơn vị chuyên môn.

Việc thực hiện các biện pháp quản lý có ý nghĩa đối với giảm nguy cơ tiếp xúc hóa chất, hạn chế hành vi thải bỏ chất nguy hại không phù hợp và tăng cường trách nhiệm của những đơn vị phát sinh chất thải.

Những nội dung trên góp phần thực hiện định hướng SDG 15 về bảo vệ hệ sinh thái trên cạn, đồng thời hỗ trợ các mục tiêu về quản lý chất thải có trách nhiệm và ngăn ngừa ô nhiễm nguồn nước.

Tuy nhiên, hồ sơ chưa cung cấp đầy đủ khối lượng chất thải nguy hại đã được thu gom, xử lý trong năm 2025; chứng từ theo dõi quá trình chuyển giao; hoặc kết quả đánh giá mức giảm rủi ro môi trường.

Vì vậy, tài liệu hiện có chứng minh được các thành phần của hệ thống quản lý chất thải nguy hại, nhưng cần bổ sung hồ sơ thực hiện và chứng từ xác nhận xử lý để đánh giá đầy đủ kết quả thực tế trong năm 2025.

Cooperate